Payment & Shipping Terms:
|Solar Panel:||Monocrystalline Silicon||Warranty:||5 Years|
|LED Chip:||Bridgelux Chip||Material:||Aluminum Alloy|
|Sensor Mode:||Time Sensor, Light Sensor, Human Body Sensor Ect||LED Light Source:||Bridgelux|
|Application:||Street, Road, Sidewalk, Pathway, Sea Port, Farm, Campus Ect|
30W LiFePO4 LED Solar Powered Street Lights With Outdoor Cctv Camera 5 Years Warranty
"Be a supplier with sense of social responsibility, constantly create a full of humanecare and high quality creative life" is our aim. It also represents a company's attitude towards responsibility. Therefore, Yigang Technology develops and produces in strict accordance with ISO9001 standards and procedures. Our QA labs use world-class equipment and facilities to get accurate data from inspections.
1. The lamp cap is formed by cast aluminum alloy in one time, and contains silicon thermal grease. Therefore, the heat dissipation effect is very good.
2. Use Q235A steel for the arm. Beautiful appearance and clever design. The arm is durable and powerful with a 9-level wind.
3. The voltage of the Monocrystalline silicon plate is 18V. The panel can be rotated 360 degrees and the angle can be adjusted up and down
between 10 and 70 degrees. The power supply is highly efficient and suitable for the world. Expansion screws or u-screws are provided free of charge. It is easy to install and transport.
4. Contains lithium Lifepo4 battery and 12V. The battery can be charged and discharged 2000 times.
5. Light Control+Time Control+PIR Sensor+Phone App control system, working time is 6-7h. On normal and sunny days, it takes 6 to 7 hours to charge. After charging, you can use it for three days in 4 rainy day.
6. Warranty: 5 years.
Hot Sale Recommendation:
Solar Panel: 65W 18V monocrystalline silicon
Battery: 12V 26Ah Lithium battery
Working Time: 6-7 hours
For 4 rainy days
Material: monocrystalline silicon
1. How to install?
Secure the product at a right angle to ensure that there are no obstructions on the surface of the solar panel.
2. How to use?
In order to avoid unloading during transportation, the product must be closed before leaving the factory. You can activate it with a pin or associated button or by peeling off the film. Depending on the project, the activation method may be different.
3. What should I do if I notice that the brightness of the light is decreasing or completely turned off?
It proves that the outdoor solar wall light battery is not enough to support normal lighting, so you need 2-3 items to charge the sun, especially in winter, the sun intensity is much lower than the standard sun, and it may take longer to charge.
4. Can I take some samples?
Yes, of course. We are honored to provide samples to you, usually samples can be prepared within 3-5 days.
5. Can we customize the product?
Yes, OEM, ODM has always been welcome.
Contact Person: Joffie