Payment & Shipping Terms:
|Solar Panel:||18V 70W Monocrystalline Silicon (Germany Solarworld)||Case Material:||Aluminum Alloy|
|LED Light:||USA Bridgelux LED With High Brightness||Lumens:||6500-7000 LM|
|Battery:||Lithium Battery 12V 36AH||Mounting Height:||7-9m|
|Discharge Time:||4 Rainy Days||Charge Time:||6-7 Hours With Sunshine|
|Working Mode:||Infrared PIR Motion Sensor & Light Control||Working Temperature:||-30℃~+60℃|
|Warranty:||5 Years||Smart Function:||Phone App Control Through Bluetooth|
Most Powerful Solar Lights Motion Sensor Light Solar Panel Street Lights
1. Lithium battery
It is a very important part of integrated solar street light. Its use and maintenance have great knowledge. The following is a brief introduction to several lithium battery maintenance methods:
1) Check: Observe whether the surface of the integrated solar street lamp lithium battery is clean and there is no corrosion and leakage. If the outer casing has more dirt, wipe it with damp cloth and detergent.
2) Observation: Observe whether the appearance of the integrated solar street lamp lithium battery has a concave or bulging phenomenon;
3) Fastening: At least once every half year, the tightening work of the connecting screws between the integrated solar street lamp lithium battery cells should be carried out to prevent looseness, resulting in poor contact and other failures. When using or replacing a lithium battery, the tools used (such as wrenches) must be insulated to prevent short circuits.
4) Charging: The integrated solar street light battery should be charged in time after discharge. In case of continuous rainy days, causing insufficient battery charging, the power supply time of the power station should be stopped or shortened to avoid over-discharging of the battery. The maintenance personnel of the power station should regularly charge the battery in a balanced manner, usually 2 to 3 times per quarter. For batteries that have been deactivated for a long time (more than 3 months), they should be recharged before being put into operation.
5) Insulation: In winter, the insulation of the battery room should be done. In the summer, the ventilation of the battery room should be done. The temperature of the battery room should be controlled between 5 °C and 25 °C.
6) Cleaning: Keep the lighting surface of the integrated solar street light PV module array clean. In areas with less rain and high sand, it should be cleaned once a month. Rinse with water before cleaning. Then wipe the water with a clean soft cloth. Do not rinse with corrosive solvents or wipe with hard objects. . When cleaning, it should be selected in the absence of sunlight or in the morning and evening. Avoid cleaning the components with cold water during the day when the PV modules are sun-heated. Very cold water can rupture the glass cover of the PV modules.
7) Replacement: Regularly check whether the connection between the PV module boards is firm, whether the connection in the square array junction box is firm, and tighten as needed; check whether the PV modules are damaged or abnormal, such as damage, grid lines disappear, hot spots, etc. Check that the bypass diodes in the PV module junction box are working properly. When there is a problem with the PV module, replace it in time, and record in detail the specific installation location of the component in the PV array.
2. Specification for 60W LED Solar Street Light:
|All in one Solar Street Light 60 Watts||Item No.: IN-260C|
|Solar panel type/power||Maximum power||18V 70W Efficiency Monocrystalline silicon (Germany Solarworld)|
|Battery/ Voltage/ Capacity||Battery type||Lithium battery 12V 36AH|
|LED light ( with PIR sensor )||Maximum power||12V 70W|
|LED chip brand||USA Bridgelux|
|Luminous flux||6500-7000 LM|
|Charging time||Pure solar energy||6-7 hours strong sunlight exposure|
|Discharging time||Full power||> 15 hours|
|Half power||> 30 hours|
|Working temperature||Unit(ºC)||-30ºC ~ +60ºC|
|Lamp material||Aluminum alloy|
|Standard||CE / ROHS / IP65/ ISO9001 / ISO14001|
|Packing information||Light size||120*34*4.5 cm|
|Net weight||18 kgs|
|Packing box||Neutral packing|
|Carton size||132*40*20 cm|
|Carton||1 set/ CTN|
|Gross weight||19 kgs|
|Container loading instruction||20' GP||265 sets|
|40' GP||550 sets|
3. Advantage of All in One / Integrated Solar Street Lights:
①. The overall design is elegant and elegant, the appearance is beautiful and modern, and the aluminum alloy shell.
②. Adopt solar green energy, environmentally friendly and save more.
③. Low-voltage drive, in line with European CE RoHS standards.
④. No mercury, lead and other harmful substances, no radiation, personal safety.
⑤. IP65 grade, lightning protection. High temperature and low temperature.
⑥. Easy to install and low maintenance cost.
4. Working Principle:
Automatic recharge at day, automatic lights at night
1. Light control: Automatic light sensor
2. PIR Motion sensor control: Human body induction
3. Time control: Light on/off time program can be set per your request.
4. Mobile phone APP control: Install our APP software in your mobile phone, then you can connect to the lights through bluetooth module and control the lights by your mobile phone APP.
All-in-one Solar Street Lights are excellent to provide energy saving and long-lasting illuminations for any outdoor areas, such as city roads, residential estate, rural road, school, highway, scenic spot, public gardens, plaza, outdoor parking, etc.
6. OEM & ODM Service:
We can offer OEM and ODM service for all products. Our professional engineering team can provide different solutions according to different project requirement. Welcome to send your inquiry!
Contact Person: Joffie